Magnum Venus Plastech CB-6000-RT - Resin Monitor - Manual (Page 26)

CB-6000-RT Material Monitor Manual
Rev. 10/2012 Page | 26
RESIN TOTAL METER SETUP SHEET:
I – I
n
P Counter A Input Parameters
Display Description Factory Setting MVP Setting
A Cnt Operating Mode cnt
ArESEt Reset Action 2ErO
AdECPt Decimal Position 0 0.00
ASCFAC Scale Factor 1 Enter factor here
ASCALr Scale Multiplier 1
ACNtLd Count Load Factor 500 0
A P-UP Reset Power-Up no yes
(All other parameters in I – I
n
P remain as set by the factory)
QUICK REFERENCE:
or
6 – SPt Setpoint (alarm) Parameters SP – 1 settings
Display Description Factory Setting MVP Setting
Lit – 1 Annunciators nor
Out – 1 Output Logic nor
SUP – 1 Power Up State off
Act – 1 Action off tOUt
ASn – 1 Assigment A Cnt
SP – 1 Setpoint Value 100 Enter signal out value
tOUt – 1 Setpoint Time Out 1.00 2.00
AUtO – 1 Auto Reset Action no 2ErOAE
rSd -1 Reset with Display no yes
(All other parameters remain as set by the factory)
QUICK REFERENCE:
or
PAR
F1
6 -SPt PAR
F2
F1
1 - I
n
P PAR
F2
PAR
Pro
Pro