Magnum Venus Plastech CB-8000-xxx Resin Monitor - Manual (Page 21)

INSTALLATION AND OPERATIONS MANUAL CB-8000-XXX
MAGNUM VENUS PLASTECH REV 1.05
APRIL 2013 PAGE 21
CHAPTER 6-OPTIONS/PARTS
UNITS
CB-8000-APS For use on APS pump systems.
CB-8000-UPS For use on UPS pump systems.
CB-8000-PAT For use on PAT pump systems.
Note: All systems come with 25’ resin sensor cable and 50’ remote reset as standard. If longer
lengths are needed they must be ordered separately.
DISPLAY UNITS
2.250” DISPLAY (LD2006P0) E-CRM-103
.541” DISPLAY (CUB5) E-CRM-102
RESIN SENSOR MOUNTS
APS PUMP SYSTES CSD-1000-APS
UPS PUMP SYSTEM CSD-1000-UPS
PATRIOT PUMP SYSTEM E-SENS-100-CB *** Note, must have E-MLM to connect)
SENSORS
APS/UPS APS-1025
PATRIOT E-SEN-102
CABLES
CB-CABLE-25 25’ EXTENSION/SENSOR CABLE
CB-CABLE-50 50’ EXTENSION/SENSOR CABLE
CB-CABLE-SP SPLITTER FOR DUAL RESETS
RESET BUTTONS
CB-RST-100 GUN MOUNTED RESET BUTTON
(RUBBERIZED)
CB-RST-200 WALL MOUNTED RESET BUTTON
NOTE: IN ORDER TO USE THE CB-RST-200 TO RESET THE LOWER DISPLAY THE CB-CABLE-SP MUST
BE USED.