Luminex FLEXMAP 3D Hardware User Manual - Manual (Page 46)

Maintenance Logs
Reproduce the following forms as necessary and use them to record maintenance
information. Fill in the dates in the first line of the table. The first table includes a sufficient
number of columns for one week (7 days). The second table includes a sufficient number of
columns for monthly maintenance (one task monthly), semi-annual maintenance (two tasks
twice yearly), and annual maintenance (two tasks yearly). For each item listed at the left,
enter your initials under each date on which you perform the task.
Short Term Maintenance - One Week
Date:
Daily
Maintenance
Initialize and
verify
Check fluid
levels
Shut down
Weekly Maintenance
Clean probe
Calibrate
Perform visual
inspection
Run weekly
maintenance
Run clog
removal
Long Term Maintenance - One Year
Date:
Monthly
Maintenance
Clean exterior
surfaces
Maintenance and Cleaning
35