Luminex No Top Plate (NTP) Swivel Base Installation and User Manual - Manual (Page 15)

5
CHAPTER 2
Using the NTP Swivel Base
NOTE:
In the following chapter, photographs show the NTP Swivel Base
with a top plate. This is included for illustration purposes only. The
top plate provided by a manufacturer can differ from the one
shown.
Installation
To install the NTP Swivel Base:
1.
Place the NTP Swivel Base onto the flat surface where it will reside.
2.
Place a level on top of the plate, right to left, to determine whether it is level.
FIGURE 3. Swivel Base with Level
3.
Repeat step 2 , turning the level back to front.