Appendix c - default settings, Appendix d - preference settings, Appendix c – default settings – Mr. Gasket 8703 Hot Rod Calculator User Manual
Page 65: Appendix d – preference settings
![background image](/manuals/337357/65/background.png)
U
ser
'
s
G
Uide
— 63
aPPendiX C – DefAULT SeTTingS
After a Clear All (), your calculator will return to the follow-
ing settings:
sTored ValUes
defaUlT ValUe
Air Temperature
60 °f
(US)
, 15.556 °C
(Metric)
Absolute Pressure
29.92 inHg (US), 1013.207 mbar
(Metric)
ADI
100%
Drag Coefficient
0.35
Mechanical Efficiency
85%
number of Cylinders
8
volumetric Efficiency
100%
If you replace your batteries or perform a Full Reset* (press ,
hold down , and press ), your calculator will return to the
following settings (in addition to those listed above):
PreferenCe seTTinGs
defaUlT ValUe
Functional Result
Rounding
0.000
Default Unit Format
Us
Meter Linear Display
0.000
* Depressing the Reset button located above the
key will also per-
form a Full Reset
.
aPPendiX d – PRefeRenCe SeTTingS
The Hot Rod Calc
has Preference Settings that allow you to
customize or set desired unit formats and calculations. If you
replace your batteries or perform a Full Reset* (press , hold
down , and press ), your calculator will return to the fol-
lowing settings (in addition to those listed on the previous page),
with the default setting for each preference listed first:
(cont'd)
UG8703E-B-inside.indd 63
3/3/2010 3:04:01 PM