Mr. Gasket 8703 Hot Rod Calculator - Manual (Page 66)

64 —
H
ot
r
od
C
alC
™
PreferenCe oPTions
1) Functional
Result
Rounding
–
0.000: calculation results obtained using the
motor, performance and environmental functions
are always displayed to three decimal places.
–
0.00: calculation results obtained using the
motor, performance and environmental functions
are always displayed to two decimal places.
–
floaT: calculation results obtained using the
motor, performance and environmental functions
are always displayed to the maximum number of
decimal places.
2) Default
Unit
Format
–
Us: unitless values stored within the motor,
performance and environmental functions are
automatically assigned the corresponding default
US units of the selected function. Additionally,
calculation results obtained within these func-
tions are displayed in US units.
–
MeTriC: unitless values stored within the
motor, performance and environmental functions
are automatically assigned the corresponding
default Metric units of the selected function.
Additionally, calculation results obtained within
these functions are displayed in Metric units.
3) Meter
Linear
Display
–
0.000: linear Meter answers are always dis-
played to three decimal places.
–
floaT: linear Meter answers are always dis-
played to the maximum number of decimal places
(for example, 1.234 M + 2.56871 M = 3.80271 M).
* Depressing the Reset button located above the  key will also per-
form a Full Reset
.
(cont'd)
UG8703E-B-inside.indd 64 3/3/2010 3:04:01 PM