AT&T 2255 - Manual (Page 4)

2 Connect the power cord.
The ANSWER ON/OFF light goes on, and
CL flashes in the Message
Window.
Use only the power cord supplied with this product.
If you need a replacement, call 1 800 222–3111.
3 Install the handset battery.
Use only AT&T Battery 2422, SKU# 23402.
INSTALLATION
Modular
telephone
jack
Standard
electrical
outlet
Table/Desk Installation
NOTE: Install the base unit and spare handset charger away from
electronic equipment, such as personal computers, television sets or
microwave ovens. Avoid excessive heat, cold, dust or moisture.
1 Connect the telephone line cord.
b) Plug the battery
pack connector
into handset.
Place the battery
pack and wires in
the compartment.
c) Replace cover by
sliding it on its
track up over
battery case until
it snaps firmly
into place.
a) Remove battery
compartment
cover by pressing
on indentation
and sliding
downward.
2