Adaptec SAS/SATA/SCSI RAID Controllers - Manual (Page 52)

Chapter 8: Installing the Driver on an Existing Operating System ●
52
8 At the Driver Name menu, press the Insert key.
9 Insert the driver disk, press the Insert key, then press F3.
10 At the A:\ prompt, press Enter.
The driver installs.
11 At the Additional Driver Option menu, select Return to driver summary, then press Enter.
12 At the Driver type menu, select Load on Additional Driver Options.
13 After the driver loads, select Continue.
14 Continue with Managing Your Storage Space on page 55 .
Installing on OpenServer
To install the driver on OpenServer:
1 Start your computer, then insert the driver disk.
2 Begin the driver package installer:
pkgadd -d diskette1
3 At the installer prompt, type go .
4 Select 1 for the aacraid package.
5 When the installation is complete, select q to quit the installer.
6 Reboot your computer and remove the driver disk.
7 Continue with Managing Your Storage Space on page 55 .
Installing on Solaris
To install the driver on Solaris:
1 Start your computer.
2 Insert and mount the driver disk:
volcheck
3 Change to the driver installer directory:
cd /floppy/floppy0/DU/sol_210/i86pc/Tools
4 Start the driver installer:
./install.sh -i
5 Reboot your computer, then remove the driver disk.
6 Continue with Managing Your Storage Space on page 55 .