Meriam M203 Altimeter Indicated Air Speed Tester - Manual (Page 31)

Service and Calibration
If the M203 can not be zeroed, recalibrated or is damaged, it must be
returned to the factory for servicing. In this case, contact the Meriam
Process Technologies representative in your area or call the factory at the
numbers listed below for a Return Material Authorization (RMA) number.
DO NOT send any unit in for service without first contacting Meriam for
a Return Material Authorization (RMA) number. If this number has not
been obtained and clearly marked on the return packaging, the unit
will be returned at the shipper’s expense.
An RMA number will be
provided by the Meriam Repair Department when you call, fax or e-
mail your information. Certification for Non-Hazardous Materials will
also be required. The RMA number must accompany all incoming
packages to insure proper tracking, processing and repair work.
To assist us in processing your service request, please have the Model &
Serial Number of the unit available when you call. This information is
located on the product label label.
Meriam Process Technologies
10920 Madison Ave. Cleveland,
28
H 44102
Ph. (216) 281-1100 FAX (216) 281-0228
E-mail: [email protected] Web:
www.meriam.com