Micromod Micro-DCI: 53ML5100 Manual Loader - Manual (Page 11)

53ML5100B Manual Loader
INSTRUCTION MANUAL
1.3 Specifications
Item Specification(s)
Power
Range (as specified in model number) 22 - 26 V dc
108 - 132 V rms
216 - 264 V rms
50/60 Hz
Power Consumption (ac/dc operation)
36 VA maximum
Internal Power Supply:
Available Power Output for Transmitters
25 V dc ± 1 V dc @ 80 mA maximum, short circuit protected.
Output Ripple 200 mV p-p maximum
Analog Input (ANI0 & 1) Signals (all analog in-puts are referenced to signal common)
Quantity 2 (ANI0 & ANI1)
Signal Range 0 -5 V dc or 1 -5 V dc (0 -20 mA and 4 -20 mA dc respectively).

NOTE: The rear terminal board has the appropriate resistors for
ANI0 and ANI1.
Input Impedance 1 megohm minimum for voltage inputs; value of ranging resistor for
current signals.
Measurement Accuracy ± 0.1% of span
Analog Output (ANO0) Signal (is referenced to power common)
Quantity 1 (ANO0)
Signal Range 0 -20 mA dc (4 -20 mA dc typically)
Load Range 0 - 750 ohms
Accuracy ± 0.2% of span
Sampling and Update Attributes
Program Scan Rate 0.05 seconds
Analog Input Signal Sampling Rate 0.05 seconds
Contact Input Signal Sampling Rate 0.05 seconds
Display Update 0.10 seconds
Output Signal Update 0.05 seconds
7