2 windows xp professional, Figure 3-4. computer management window – Micromod Micro-DCI: 53SU6000 COMMUNICATIONS SERVICES User Manual

Page 17

Advertising
background image

53SU6000 INSTALLATION AND SETUP GUIDE

Introduction 9

each Supervisor Board in the system. Valid Supervisor Board I/O addresses are: 0x280, 0x290, 0x300,
0x310, 0x380, 0x390 and 0x3A0.

3.3.2 Windows XP Professional

•

Open the Help and Support Center dialog by clicking on the Start button, then selecting Help
and Support
from the menu.

•

Click Support on the Help and Support Center toolbar.

•

Click Advanced Information on the left side of the window.

•

Click View Detailed System Information on the right side of the window.

•

From the System Summary\Hardware Resources path, click I/O. The first set of four
digits in the Address Range column, as shown in

Figure 3-5

, contains the physical I/O

addresses that have already been assigned to another function. Find an unused I/O address
for each Supervisor Board in the system. Valid Supervisor Board I/O addresses are: 0x280,

Figure 3-4. Computer Management Window

Advertising