Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 77)

Training Manual
Introduction to Micro-Tools
7 - 19
36. Click the Add License icon or select Add New License from the MicroDCI License
Administrator Tool bar
Figure 7.31.
Micro-Tools Setup
Software License
Administrator
37. If the hardware sentinel key is installed in the appropriate port, the License Administrator
will attempt to read the hardware key. If successful, the hardware key ID number will
automatically be entered in the Host ID box of the license window.
38. Using the license paperwork supplied with the software, enter the feature (udci or
microtools3) from the paperwork into the space on the License Administration window
marked Feature.
39. Enter the Version number for the Feature as identified on the license paperwork.
40. Enter the 20 character license string for the Feature as specified on the license paperwork in
the space on the License Administration window identified as Key. There should be no