Micromod MOD: 1726F Output holder for MOD 30ML - Manual (Page 5)

Using The Output Holder With MOD 30ML
Introduction
1
INTRODUCTION
SCOPE
This book is one of a series that discusses the application of MOD 30ML™ to commonly
encountered process control loops. This book discusses use of the 1726F Output Holder
with the MOD 30ML controller.
The primary purpose of this document is to identify the function of the output holder, how
to connect an output holder card to the MOD 30ML Controller and how the output holder
compound strategy interfaces with the hardware. Connection diagrams and list are
supplied to show how the 1726F Output Holder is connected to the MOD 30ML.
FIRMWARE VERSIONS
The process examples in this book are applicable to all firmware versions of the
instruments.
RELATED INFORMATION
Before actually configuring an instrument, you should be familiar with the information
contained in the following publications:
•
IB-1800R-OPR - MOD 30ML Multiloop Controller Operation Guide
•
IB-1800R-APP - MOD 30ML Functions Data Base Reference Guide
•
IB-1800-INS - MOD 30ML Multiloop Controller Installation Guide
•
IB-1800-M30 - MOD 30ML Multiloop Controller Replacement for MOD 30 Instruments
Installation Guide