Minuteman H20 Walk-Behind Scrubber Disc Traction Drive - Manual (Page 31)

31
Machine Operation
CAUTION: Make sure scrub deck is clear of all personnel
and obstructions before operating Brush Unload.
Unloading Brush
3. When done correctly the brush
should release from the scrub deck
and fall to the floor.
1. To unload the brush, first lift the scrub
deck by pressing down on the deck
lift pedal . Make sure the pedal is in
the “home” position shown below.
2. Momentarily turn the key (1 to 2
seconds) to the “Brush Unload”
position then let the key return
to the off (O) position.