Minuteman Kleen Sweep 40R-47R HM50QP - Manual (Page 25)

Operation
5.4 Working With the Kleen
Sweep 40R/47R
The driver is requested to carefully read
this operator's manual. All controls are
marked with easy-to-understand sym-
bols that ease familiarization. First dri-
ving attempts should be limited to clear
areas until you are familiar with all con-
trols and their functions.
Please comply with the
following safety provisi-
ons:
When working with the
Kleen Sweep 40R/47R all
safety measures gene-
rally applicable for hand-
ling vehicles and fuels
have to be observed. No
passenger transport ad-
mitted with the Kleen
Sweep 40R/47R.
Warning and instruction
labels attached to the
machine contain im-
portant information
about safe operation
and guarantee your per-
sonal safety. Before
commencing work, the
operator has to make
sure that the machine
and its accessories are
in proper and safe condi-
tion and comply with the
provision for safety at
work. Do not operate the
Kleen Sweep 40R/47R
without protective de-
vices.
When leaving the machi-
ne unattended, remove
ignition key to avoid un-
authorized use.
5.4.1 Switch Electro-Motor On and Off
For safety reasons, the
Kleen Sweep 40R/47R is
equipped with a seat
contact switch. Starting
the engine is possible
only when the driver is
seated. If the seat con-
tact opens while the
electro-motor runs, the
key switch of the Kleen
Sweep 40R/47R has to
be turned off and on
again.
- Set all levers and switches to neutral.
- Engage parking brake.
- Turn key switch to "I".
Make sure that the drive
pedal is in neutral positi-
on.
25