Minuteman C45014-02 Ambassador Junior International 240V - Manual (Page 6)

5
OPERATOR VIEW OF CONTROL PANELS
1. Vacuum switch
2. Brush switch
3. Pump spray switch, continuous operation position. Pump supplies solution to spray bar
for cleaning in large open areas.
4. Center position is “off”.
5. Momentary position is for intermittent spray for cleaning in smaller more confined areas.
When released, switch will return to center off position.
6. Pump auxiliary when using separated floor tool or upholstery tool, switch must be
switched to on position. See figure 2 for solution hose hook up - aux. out.
7. Brush pressure adjustment gauge.
See figure 2 for brush adjustment knob location. Adjustments past the green zone on
gauge will shorten brush and brush drive motor life.