Minuteman Port A Scrub with Power Pack - Manual (Page 22)

22
Operation
3.3.1 After completing cleaning
1. Switch the machine off with the main
switch (Fig. 11/5).
2. Check the battery indicator (Fig. 11/
1), recharge the batteries as neces-
sary; refer to Section 5.4.1.
3. Raise the brush head by tipping the
shaft and slide the supporting rollers
(Fig. 11/6) to the parking position
(X).
4. Transport the machine to an appro-
priate servicing area.
5. Empty and rinse out the solution tank
(Fig. 11/7) and recovery tank (Fig.
11/8).
Observe the applicable laws
and local regulations when dis-
posing of cleaning agents!
6. Clean the machine and check the
following for signs of wear:
- Brushes (Fig. 11/9) in the brush
head
- Sealing strips (Fig. 11/10) on the
squeegee
- Solution filter, air intake filter and
seals in the housing cover (Fig. 11/
11)
Fig.11
8
7
3 1 4 2
5
6
9 10
X
11