Minuteman Port A Scrub with Power Pack - Manual (Page 37)

37
Maintenance and Care
5.6.1 Emptying the recovery tank
Clean the recovery tank (Fig. 17/1) ev-
ery day or as necessary.
1. Switch off the machine using the
main switch and disconnect the bat-
tery plug.
2. Open the housing cover and remove
the recovery tank (Fig. 17/1).
Observe the applicable laws
and local regulations when dis-
posing of cleaning agents!
3. Bring the recovery tank to an appli-
cable disposal point, open the drain
plug (Fig. 17/2) and empty the recov-
ery tank completely.
4. Flush out the remaining dirt with
fresh water.
5. Replace the drain plug and reinstall
the recovery tank.
5.6.2 Checking the seal
Check the recovery tank seal (Fig. 17/3)
weekly and clean or change as neces-
sary.
1. Switch off the machine using the
main switch and disconnect the bat-
tery plug.
2. Open the housing cover and remove
the seal (Fig. 17/3) from the housing
cover.
3. Clean the seal and reinstall it or in-
sert a new one.
5.6.3 Cleaning the air intake filter
Check the function of the air intake filter
(Fig. 17/4) daily and clean it as neces-
sary. The air intake filter can be disas-
sembled by means of a clip
mechanism.