Mirion Technologies instadose 2 Dosimeter - Manual (Page 4)

Patented direct ion storage technology
BLE technology
Minimum Reportable Dose
3 mrem (0.03 mSv)
1 mrem (0.01 mSv) upon request
Lower Limit of Detection 1 mrem (0.01 mSv)
Useful Dose Range
1 mrem - 1000 rem*
(0.01 mSv - 10 Sv)
Energy Response
Beta (MAX) 0.766 MeV – 5 MeV
Photon 5 KeV – 6 MeV
Accreditations/Approvals/
Licenses In the United States under NVLAP
(lab code: 100555-0)
tecHnical sPecifications
instadose 2 dosimeters
tecHnical requirements for instalink ProDucts
instalink™ usB
instaLink USB allows workstations connected to the internet to transmit dose data to Mirion’s secure servers. For the
instaLink USB to work it must be connected to the workstation and the “id2monitor” driver must be installed. By adding the
“id2monitor” to the startup menu you will not need to launch the driver each time the system is turned on. The instaLink USB
can receive and transmit dose reads as long as the workstation is turned on and not in hibernation mode. Once a workstation
enters hibernation mode or is turned off, the “id2monitor” will also enter hibernation mode and will need to be re-launched. The
BLE communication range is 25’ or greater depending on the physical environment.
instalink™ Hotspot stations
instaLink securely transmits dose data to Mirion’s server. The station comes with a power cord and mounting
brackets. The BLE communication range is 25’ or greater depending on the physical environment. The instaLink
Hotspot station can be connected to your network by either Ethernet or WiFi. The instaLink comes with
configurable Wifi/Ethernet options: WPA, SID, Proxies, etc.
iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
2652 McGaw Avenue
Irvine, CA 92614
USA
U.S./Canada +1.800.251.3331
U.K. 0170.629.9329
Worldwide +1.949.419.1000
www.mirion.com
LIT4394_0_US
© Copyright 2013, All rights reserved. For trademark and registered trademark information.
Specifications are subject to occasional change, please ask for confirmation of the information given in this publication
.