Atlas Sound FA62T-8MB User Manual

Strategy series® ii 6" ceiling speaker systems, Features, Applications

Advertising
background image

Specifications subject to change without notice

© 2004 Atlas Sound

Printed in U.S.A.

000704 ATS001372 RevD 7/04

SL1-2019

2.29

One

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

/ FAX (800) 765-3435

AtlasSound.com

STRATEGY SERIES® II 6" CEILING SPEAKER SYSTEMS

FAP62T

FA62T-8MB

FAP62T

C-Ring/V-Rail

Mounting System

(included)

(optional)

FAP62-TR

FEATURES

• Extended low frequency response from the 475 cubic inch optimally tuned and ported deep

drawn galvanized steel enclosure
• Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg"

mounting system (Included)
• Front mounted tap selector switch for easy system tuning adjustments includes transformer

bypass setting for 8 ohm direct coupled operation
• Unique "trap door" input section allows for through conduit runs with rigid or flex conduit
• 4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy

chaining additional Strategy full range speakers or subwoofers
• "Press fit" grilles blend better into contemporary architecture
• Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low

frequency response while providing increased output for higher SPL applications
• UL Listing Pending

APPLICATIONS

FAP62T combines superior coaxial loudspeaker performance with even dispersion and easy installa-

tion. A low profile enclosure and wide coverage make the FAP62T a perfect choice for low ceilings. The

FAP62T will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high

fidelity sound reproduction in an attractive and easy-to-install system. The FAP62T is ideal for high-intel-

ligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

GENERAL DESCRIPTION

The FAP62T’s 110 degree dispersion angle can reduce the number of loudspeakers necessary to

achieve coverage in distributed systems with low ceilings.

The loudspeaker component matches the performance of the legendary Atlas Sound FA136 driver.

High quality construction 1" voice coil 6" coaxial cone type driver includes polypropylene cone with a

butyl rubber surround. The19mm coaxially mounted tweeter is constructed of PEI. A high sensitivity of

88dB average (92dB peak) means less power may be required to achieve the desired SPL. This loud-

speaker is factory assembled to an optimally tuned & ported deep drawn enclosure and includes a

specially designed 32 watt low saturation 70.7V/100V transformer. A convenient front mounted selec-

tor switch allows tap selection without the need to remove the speaker from the ceiling. This switch

also includes a transformer bypass setting for 8 ohm direct coupled operation.

MOUNTING ACCESSORIES

Mounting is simplified with Strategy style "dog leg" tabs that allow easy installation into drop tile or drywall

ceilings with provided tile bridge assembly. The tile bridge consists of (2) "V" shaped formed mounting

rails and a c-ring assembly. The c-ring can be attached to the rails with the screws provided to extend

support to the t-bar grid in suspended ceiling applications. Multiple hole locations are provided to allow

the c-ring to be positioned to the outer edge the tile if necessary.

For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into the hole cut

for the FAP62T. For easy positioning the "V" shaped support rails match the shape of the C-ring tabs

for easy maneuvering and location when working "blindly" above the deck. A uniquely designed "easy

access" input panel on the side of the enclosure allows for "thru" conduit runs using flexible or rigid con-

duit. Below this cover resides a detachable Phoenix style locking four-pole connector, which provides for

easy daisy chain wiring to other full range 70.7V loudspeakers or Atlas Sound FASUB70 subwoofers.

The package includes an attractive press-fit grille, which nicely matches contemporary architecture.

For new construction drywall ceiling applications, the optional FAP62-TR trim ring is available. This unit

provides a marked location for drywall installers to cut around essentially reserving the desired location

in the ceiling until final installation of FAP62T. Mounting holes are provided to accommodate 16" or 24"

OC stud/joist mounting.

A support ring is also provided on the top of the FAP62T enclosure to facilitate an auxiliary support

cable.

NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT BE UTILIZED IN DROP

CEILINGS FOR SAFETY AND SEISMIC CONSIDERATIONS).

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

/ FAX (800) 765-3435

AtlasSound.com

PEFORMANCE SPECIFICATIONS BY MODEL

MODEL

POWER
RATING

70.7V
TAPS

FREQUENCY

RESPONSE (±7dB)

SENSITIVITY

(1W/1M)

WOOFER

WOOFER

MAG WT.

HF

DRIVER

DIMENSIONS

ENCLOSURE

VOLUME

CUT-OUT

DIMENSION

WEIGHT-LESS

TILE BRIDGE

FAP62T

50 Watts

(Transformer

Limited)

2, 4, 8,

16, 32

63Hz-20kHz

88dB

Average

6” Ploy Cone
Butyl Rubber

Surround

14 oz

(398g)

Coaxially Mounted

PEI Dome

Tweeter

12.5” (318mm) Dia.

8.48” (215mm)

OverAll Height

475 Cubic

Inches

11”

(279mm)

9.5 lbs.

(4.4kg)

Advertising