MIDLAND Geopoint Box SMS - Manual (Page 25)

24
Preliminary Procedures
Power On and Off
To switch the tracker on/off, press the key situated in the upper part of the device
for 2 seconds. At tracker switching on/off, the 3 LEDs will light up together at the same
time for 1 second and an acoustic signal will be emitted.
WARNING: Do not switch on the tracker when its use is prohibited or
when it may cause interference or danger (refer to the chapter Safety
Instructions).
NOTE: The GPS receiver is switched on automatically only if the
programmed tracker functions require the GPS system use.
LED Indicators
The LED indicators on the device front part shows the tracker main functions status.
ON / OFF