MIDLAND Geopoint Box SMS - Manual (Page 38)

37
Use of the Functions
Alarm SMS
The Alarm SMS are alarm messages sent (if the function was enabled) to a phone number every time that:
the tracker battery is almost discharged •
the tracker memory is full •
the GPRS network is available •
the GPRS network is not available •
the GPS signal has been lost •
the GPS signal has been restored •
the tracker motion is revealed •
the tracker motion stops •
Programming
To use this function, it is necessary to select the desired event item and set the phone number where the
Alarm SMS will be sent.
1) Select the event item Using the provided software
2) Set the phone number Using the provided software
Example of the SMS message displayed on the mobile phone, when the tracker battery is almost discharged
GEO,ID:GLORIA,LOW BATTERY,07/04/10,10:09
Example of the SMS message displayed on the mobile phone,when the tracker memory is full
GEO,ID:GLORIA,MEMORY FULL,07/04/10,10:09