MotorVac CarClean System - Manual (Page 4)

Position Machine
Place machine on the passenger side floor close to the firewall and point exhaust
vent towards the vehicle’s air-intake. (Photo B)
Ensure the machine is level. Center air bubble. (Inset Photo B)
Start the vehicle. Vehicle must be running for the duration of the treatment.
Climate Control
Adjust climate control to ALL of the following settings. Settings may differ between
vehicle makes and models. Check owner’s manual for proper climate control operations.
1. Turn ON A/C
2. Set to RECIRCULATE or MAX A/C
3. Set temperature to 72˚F / 22˚C
4. Set fan to HALF SPEED
5. Set air-flow to DASH VENTS ONLY
Power Machine
Ensure vehicle is running and A/C is turned “ON”. Connect 12V DC connector into
the vehicles 12V system. (Photo C) All indicator lights will illuminate then turn off
within 2 seconds.
Press RED Start button. In-Progress indicator light will illuminate. (Photo D)
B
INSET B
in progress complete low fluid
on / off
C
D
3