MotorVac COOLANTCLEAN III - Manual (Page 3)

Introduction
Congratulations on your selection of the CoolantClean3 Cooling System Service Unit.
By choosing this product, you are acquiring the most technologically advanced method
available for performing cooling system services and coolant exchanges.
The CoolantClean3 System is designed to service most automotive applications by exchanging virtually
All of the coolant in the vehicle’s cooling system. Connections to the vehicle are achieved with the
supplied adaptors that install in-line between the vehicle’s radiator & upper radiator hose.
Once connected, the unit can be safely used to:
Relieve system pressure to provide safe, worry-free access to the vehicle’s system.
Pull down or evacuate the coolant levels in the radiator and overflow tanks,
providing safe connection of the unit without hot coolant worries.
Service the cooling systems by exchanging the coolant in the vehicle’s system.
With the vehicle’s engine idling, the CoolantClean3 unit receives used coolant flow from the vehicle’s
system through its RED hose and diverts the flow to an external waste container or to the shop’s coolant
disposal system. At the same time, new coolant flow to the vehicle will be supplied from the
CoolantClean3’s pump through the Green hose. When complete, the unit will automatically revert to a
bypass or flow through mode alleviating the need to watch over the service.
It is recommended that vehicles (with conventional type coolant) have their cooling systems serviced
every 15,000 to 30,000 miles, or according to the manufacturer’s recommendations. Periodic service
intervals are recommended to provide proper protection against overheating and breakdown of the
coolant’s protective properties. Old coolant can no longer protect against rust or acids that can
breakdown metal & aluminum parts in the system.
Have all associated personnel study this Operators Manual completely to become thoroughly familiar
the CoolantClean3 Cooling System Service Unit & it’s proper operation.
IMPORTANT
The CoolantClean3 Cooling System Service is designed to work
EXCLUSIVELY
With standard automotive coolant formulations.
Use of additives or chemicals during services may cause operational failure of
the CoolantClean3 Service System and will void the manufacturer’s warranty.
See the warranty card for specific details.