MotorVac COOLANTCLEAN III - Manual (Page 5)

System Features and Functions
The front of the Coolant Clean-III Cooling System Service unit contains the Control Panel,
Fluid Filler Neck for adding coolant to the unit’s Reservoir Tank & Tank Level Indicator.
System overview and descriptions follow.
Front View - Control Panel Features and Functions
A. Reservoir Filler Neck
Access port to add coolant mixture to the unit’s reservoir tank.
B. Top-Off Switch
Used to Top-Off / add coolant to the vehicle’s system.
Upon completion of the service procedure.
C. Amber “Low Fluid Level”
Indicator Light Illuminates when the unit’s reservoir tank has been depleted of
coolant.
D. Green “Service in
Progress”
Indicator Light
Illuminates when the unit is in the SERVICE mode
E. 3 Position Power Switch:
CENTER Position:
PRESSED TO LEFT:
PRESSED TO RIGHT:
Unit will be OFF / In By-pass mode (when connected to a vehicle)
Activates the unit’s VACUUM mode
Activates the unit’s SERVICE mode
F. Empty Waste Switch
Used to empty the waste from ‘capture’ tank after service is
completed.
G. Clean Tank Level Indicator
Indicates the coolant mixture level in unit’s reservoir tank.
H. Waste tank level indicator Indicates the used fluid level in the capture tank.
I. Output pressure gauge Indicates system pressure during service.
A
D.
C.
B.
E.
F.
G.
H
I