MP Pumps FRX 75-SP HYDRAULIC - Manual

FRX 75-SP HYDRAULIC
3/4" x 3/4" Self Priming Centrifugal Pump
Model FRX75-SP Hydraulic is a high performance self-priming 316
stainless steel centrifugal pump close coupled to a hydraulic motor. The
pump is ideal for marine, agricultural, and industrial applications where
suction lift is required.
The FRX75-SP HYD model features all 316 stainless steel components for
superior corrosion resistance when pumping chemical compounds. A
carbon / ceramic / Viton bellows shaft seal is standard. Ports are ¾” NPT
with a 1/8” NPT fill port. The check valve flapper design enhances the self
priming capability to 12 foot suction lift.
The hydraulic motor is designed with SAE #6 ports for the tank side while
the pressure side has SAE # 4 ports. Maximum Pressure is 1000 PSI.
Maximum oil flow is 3 GPM.
SPECIFICATIONS:
PSI . . . . . . . . . . . . . . . . Up to 21 PSI
Suction and Discharge . . 3/4" NPT x 3/4" NPT
Materials of Construction 316 stainless steel
Flow . . . . . . . . . . . . . . . Up to 30 GPM
Head Feet . . . . . . . . . . . Up to 50'
Impeller . . . . . . . . . . . . 316 stainless steel semi-open
Drive Options . . . . . . . . Hydraulic motor .08 cu. in.
Seal . . . . . . . . . . . . . . . Special seals upon request
Standard - carbon / ceramic / Viton
Application:
Agricultural •
Commercial •
Industrial •
Marine •
OEM •
Hydraulic Fluid Flow:
Up to 2.5 GPM •
Hydraulic System Pressure:
Up to 800 PSI •
Patent #:
US PATENT # 8,202,046 B2 •