Multichannel Systems µPA16+32 Manual - Manual (Page 19)

15
5.1.2 Output Connector
The signal ground is connected to the ground of the amplifier. The signal ground is used
as the reference for the following filter amplifier.
Pin Channel Pin Channel
Pin 1 Channel 1 Pin 23 Channel 20
Pin 2 Channel 4 Pin 24 Channel 23
Pin 3 Channel 7 Pin 25 Channel 26
Pin 4 Channel 10 Pin 26 Channel 29
Pin 5 Channel 13 Pin 27 Channel 32
Pin 6 Channel 16 Pin 28 Ground GND
Pin 7 Channel 19 Pin 29 Negative supply voltage
Pin 8 Channel 22 Pin 30 Positive supply voltage
Pin 9 Channel 25 Pin 31 Ground GND
Pin 10 Channel 28 Pin 32 Channel 3
Pin 11 Channel 31 Pin 33 Channel 6
Pin 12 Ground GND Pin 34 Channel 9
Pin 13 Ground GND Pin 35 Channel 12
Pin 14 Positive supply voltage Pin 36 Channel 15
Pin 15 Positive supply voltage Pin 37 Channel 18
Pin 16 Ground GND Pin 38 Channel 21
Pin 17 Channel 2 Pin 39 Channel 24
Pin 18 Channel 5 Pin 40 Channel 27
Pin 19 Channel 8 Pin 41 Channel 30
Pin 20 Channel 11 Pin 42 Ground GND
Pin 21 Channel 14 Pin 43 Negative supply voltage
Pin 22 Channel 17 Pin 44 Negative supply voltage