Multichannel Systems µPA16+32 Manual - Manual (Page 6)

Micro Preamplifier Manual
2
1.3 Important Safety Advice
Warning: Make sure to read the following advices prior to install or to use the device
and the software. If you do not fulfill all requirements stated below, this may lead to malfunctions
or breakage of connected hardware, or even fatal injuries.
Warning: Obey always the rules of local regulations and laws. Only qualified personnel should be
allowed to perform laboratory work. Work according to good laboratory practice to obtain best
results and to minimize risks.
The product has been built to the state of the art and in accordance with recognized safety engineering
rules. The device may only
 be used for its intended purpose;
 be used when in a perfect condition.
 Improper use could lead to serious, even fatal injuries to the user or third parties
and damage to the device itself or other material damage.
Warning: The device and the software are not intended for medical uses and must not
be used on humans.
 Malfunctions which could impair safety should be rectified immediately.
 Any physical damage of the cable, such as a broken cable, causes a physical damage
of the micro preamplifier that cannot be repaired.
 Protect the device from heat. Do not autoclave!
 You can clean the connectors with distilled water in an ultra sonic bath, but keep the cable away
from the fluid. Dry the device with compressed air.
 Use and keep the device always in a dry environment. Do not expose it to fluids or vapor
for a longer period of time.