Multichannel Systems ME-System Manual - Manual (Page 22)

ME-System Manual
22
2.8.3 Triggering other Instruments by the Digital OUT
The digital output of the MC_Card and the USB based data acquisition sends 20 ms TTL pulses
(0 V = LOW and 5 V = HIGH). This feature can be used to apply a feedback triggered by a signal
or a parameter stream.
For example, you can connect the Trigger In of a STG (stimulus generator) to the digital
output via Digital IN / OUT Extension (MC_Card) or Digital IN / OUT connector (USB based data
acquisition). You can also use the digital output for a synchronization of the ME-System with
other systems, for example, for video tracking (provided that the other system of choice is able
to receive TTL pulses). Please see the documentation on the Digital Output instrument in the
MC_Rack Help or Manual for more details.