Multichannel Systems ME-System Manual - Manual (Page 3)

Table of Contents
1.1 Operator's Obligations 5
1.2 Guarantee and Liability 5
1.3 Important Safety Advice 6
2.1 Basic Components of ME-Systems 9
2.2 System Configurations and Optional Components 10
2.2.1 Single Components for Standard Systems 11
2.2.2 ME Data Acquisition 11
2.2.3 Miniature Preamplifiers (MPA) 13
2.2.4 Filter Amplifiers with Fixed Gain (FA) 13
2.2.5 Programmable Gain Amplifiers 13
2.3 Accessories 14
2.4 Add-ons for Stimulation 14
2.5 Setting up the ME-System 15
2.6 Supply Power and Recommended Setups 16
2.7 Signal Amplification and Filters 17
2.8 Data Acquisition 18
2.8.1 MC_Card Hardware 18
2.8.2 DC Offset Correction 18
2.8.3 Sampling Rate 19
2.8.4 Software Package 20
2.9 Digital Input / Output, System Synchronization 21
2.9.1 Triggering the MC_Card and MC_Rack 21
2.9.2 Custom Switch for "Remote-Controlling" of the MC_Card 21
2.9.3 Triggering other Instruments by the MC_Card 22
3.1 About Troubleshooting 23
3.2 Triggering / Digital Input does not work 23
5.1 Amplifiers 27
5.2 ME-Sytems 28
5.3 Accessories 29
5.4 Add-ons for stimulation 30
5.5 Spare parts 30
5.6 Multielectrode Arrays 31