Multichannel Systems STG-Lite Manual - Manual (Page 19)

Use of STG-Lite
15
4.3 Stimulation Pattern: Pulse
Select stimulation pattern "Pulses". The main menu with default settings appears.
Channel 1
The option "Start" for channel 1 appears when no pulses are downloaded. The option "Stop"
for channel 1 appears when program is running.
When using the option "Train" under "Pulse Pattern", the remaining time of the pulse train
(in seconds) is displayed below the "Start / Stop" button.
Pulse Shape
Select the pulse shape of the stimulation pulse: positive monophasic or negative monophasic
pulses, or biphasic pulses with positive-negative phase or biphasic pulses with negative-positive
phase. Select the phase duration in microseconds (μs) from the drop down menu.