Multichannel Systems Roboocyte2 Scripting Manual - Manual (Page 8)

Roboocyte2 Manual
8
Variable Robo2. Description
SelectedWells array of integer indices of the selected wells
SelectedWellNames array of strings of the names of the selected wells
VALUE last measured value (current or voltage)
VALUE_IC last measured current at the current electrode
VALUE_UC last measured voltage at the current electrode
VALUE_US setpoint voltage (command potential)
VALUE_UV last measured voltage at the voltage electrode
RESISTANCE_U current impedance of the U electrode
RESISTANCE_I current impedance of the U electrode
SCRIPT_FILE file name of current script
DATE_NOW current date (string) in the format yyyy-mm-dd, e.g.
2011-10-18
TIME_NOW current time (string) in the format hh:mm:ss, e.g.
14:18:22, (Roboocyte2 V >= 1.1.5)
MINIMUM minimum calculated value in the analysis ROI (to be used
after a recording is finished
POS_MINIMUM position of the calculated minimum
MAXIMUM minimum calculated value in the analysis ROI
POS_MAXIMUM position of the calculated maximum
AVERAGE calculated average value in the analysis ROI
AREA calculated area in the analysis ROI
BASELINE_AVERAGE calculated baseline average in the baseline ROI
SCRIPT_FILE name of the actual script file
TIME the number of minutes passed since the last
TIME_S the number of seconds passed since the last StartTimer
command
ALIGNMENT_X alignment x position in µm
ALIGNMENT_Y alignment y position in µm
ALIGNMENT_Z alignment z position in µm