Diamond Products CC-HG-SK Hydra Gen - Manual (Page 14)

To Start Engine:
Push Rocker Switch To Turtle Position
TURN Ignition Key To Start Position. Release Key When Engine Starts.
Push Rocker Switch To Hare Position. For ALL Functions Related To This Unit
To Shut Off Engine:
Return Rocker Switch To Turtle Position
Let Idle For 2 Minutes
Turn Ignition Key Off
WARNING:
Do NOT Use Generator Or Hydraulics
With The Engine Running In Turtle Position!
For Generator Use:
With Engine Running In The Hare Position,
Engage The 70Amp Main Breaker. Now You Are Ready For ALL Generator
For Hydraulic Use:
With Engine Running In The Hare Position,
You Will Have Live Hydraulics.
WARNING:
Do NOT Attempt To Use The Hydraulics
When The Engine Is In The Turtle Position!
OPERATING INSTRUCTIONS
CC-HG-SK
(With Electronic Controls)
14