Diamond Products CC-HG-SK Hydra Gen - Manual (Page 15)

OPERATING INSTRUCTIONS
CC-HG-SK
(With Electronic Controls)
Adjusting Hydraulic Pressure And Flow:
This Unit Is Equipped With Electronic Controls
The Pressure And Flow Are Adjustable On This Unit
WARNING:
Do NOT Adjust Pump!
To Regulate The Flow, The On/Off Switch Can Be Ramped Up And Down
To Control The Gallons Per Minute. This Can Be Done At The Working Tool
All Pressure Adjustments Are Made At The Unit ITSELF.
Use The Lower Regulation Knob To Make This Adjustment
Maximum Flow Adjustments Can Also Be Made With The Upper Regulator Knob
NOTE:
This Unit Is Equipped With A
Flow Meter and Pressure Gauge
WARNING:
Be Sure That When You Are Using The Generator Only;
That The Switch To Turn On The Hydraulics
Is In The OFF Position!
Electrical Outlets:
Description:
70Amp Main Breaker 480Volt 3Ph
15Amp Breaker 480Volt 3Ph
30Amp Breaker 110Volt 1Ph
20Amp Breaker 110Volt 1Ph
15