Diamond Products CC1600 - Manual (Page 14)

Chapter 6
MAINTENANCE
Proper preventative maintenance is essential to ensure a long service life, minimize
downtime for repair and provide for safe, efficient operation. We recommend the
following service schedule.
WARNING!
Disconnect the power unit before servicing the saw.
DAILY
• Check roller and slide alignment and for flat spots on the rollers or other
conditions which might prevent free rotation. Grease rollers at least once a day.
• Check for smooth, free arm and travel motion.
• Check water flow.
• Check for hydraulic fluid leaks at the blade and travel motor connections.
• Check blade guards and flanges for damage. Replace if damaged.
WEEKLY
• Check hydraulic couplings for damage and replace if necessary.
ANNUALLY
• Major service to be carried out by Diamond Products or an authorized service
representative.
MISCELLANEOUS
• Periodically check for low gear oil in the pivoting gearbox assembly and add gear oil
in accordance with table 4 as required.
• Periodically check the lubrication of the main housing gears. If replacement is
necessary, wipe out the old lubricant and fill the gear cavity with new lubricant in
accordance with table 4 as required.