Diamond Products CC1600 - Manual (Page 5)

Chapter 2
TECHNICAL DATA
DIMENSIONS
15.8
18.4
6.4
1.0
3.6 6.4
17.3
16.8
11.4
WEIGHT
Saw only (1:1 blade drive ratio) 87 lb. (37.2 kg)
Saw + Lamina motor 90 lb. (38.5 kg)
P-T Saw + Cross motor 118 lb. (49.9 kg)
Track (With stiffener), per ft. 10.9 lb. ( 4.9 kg)
Track (Without stiffener), per ft. 4.9 lb. (2.2 kg)
BLADE DRIVE
Std. 3.8 hydraulic motor rated at 2500 psi (172 bar), wt 18 lb. (8.2 kg.)
Opt. 5.2 hydraulic motor rated at 2500 psi (172 bar), wt 19 lb. (8.6 kg.)
Travel: Hydraulic Travel motor rated at 1500 psi (103 bar)
WARNING!
Spinning the blade faster than the manufacturer’s recommended
speed can damage the blade and cause serious personal injury.
Some manufacturers mark the maximum safe RPM on the blade.