Diamond Products FZ-2ST - Manual (Page 34)

8.2 Checking tension of toothed belt
•
Remove the rubber seal of the blade flange
•
Remove the belt cover
•
Check the tension
8.3 Tensioning the toothed belt
•
Loosen 8 Screws (1)
•
Turn screw (2) with fork wrench until tensi-
on is correct
•
Fasten all 8 Screws (1).
•
Mount rubber seal and belt cover
Fig. fz7-1a.tif Fig.zahnspa.tif
Fig. fz7-1b.tif
Hhv‡rhpr Aa!T
Page 34 FZ_29811