Diamond Products FZ-2ST - Manual (Page 6)

Hazard Safety clothing
falling parts: helmet, hard-toed
boot
moving,
sharp-edged parts:
gloves
flying sparks and
pieces: safety glasses
slipping: antislipping shoes
noise: ear protectors
contamination of
airways:
mask
Materias to be machined
Only the following materials are to be
machined by HYDROSTRESS-equipment:
•
Concrete and stone
Other materials are not to be machined.
Especially avoid machining:
–
X‚‚qÃyh†‡vp Ãtyh††
Cutouts and drilling cores
These pieces can be very heavy.
Example:
A cube of concrete measuring 0.5 by 0.5 by
0.5 meters weighs about 300 kg. A drilling
core with a diameter of 30 cm and a lenght of
1 meter weighs about 180 kg.
Make sure that these pieces can not fall or tip
over and cordon off the hazardous area!
Safety devices
Never run the machine without correctly mo-
unted safety devices (see "safety devices" in
this manual)!
Power units and accessories
Use the machine exclusively together with the
recommended power units and accessories
(see "connectable units" and "accessories" in
this manual).
Local safety regulations
Pay attention to the safety regulations of your
local branch associations!
Thsr‡’Ãv†‡ ˆp‡v‚† Aa!T
Page 6 FZ_29811