Diamond Products WSE1217 - Manual (Page 6)

TYROLIT Hydrostress AG
Page 6 Wall saw WSE1217 «««
Mounting the drive motor
u
Mounting the saw blade
DANGER
It can cause death or serious injury if the saw blade fl ies away.
u Only use original screws and bolts from TYROLIT Hydrostress AG.
DANGER
Serious injury can be caused by sudden start-up of the saw blade.
u Switch off the control unit before working on the saw blade.
u Isolate the control unit from the mains supply.
Preparations for assembly
u During initial installation, remove the fl ush cut anchoring screws on the quick-release fl ange.
3.3
3.4
3.4.1