Dings Dynamics Group 60 Series Coupler NEMA 4 - Manual (Page 12)

SPECIFICATIONS
Torque: 1-1/2 through 20 lb. ft.
NEMA Motor Frame Sizes: 56C, 143TC, and 145TC.
Enclosure: Aluminum with steel wrap cover
Voltage: All NEMA single phase voltages and
frequencies are standard. Others optional.
Duty: Rated for continuous duty.
Mounting: Direct to NEMA C face, with one
additional C face for mounting of equipment to
brake. Horizontal or vertical position with slight
modifications.
Maximum Ambient Temperature: 40 o C.
Maximum Input Speed: 3600 RPM
Certification:
Models 4-60000-5153 are certified CSA Enclosure 4.
ORDERING INFORMATION
Replacement parts can be purchased from your local
distributor or from Dings Co. at the address and phone
number shown on the last page. The name of the Dings
distributor or sales representative in your area can be
obtained by calling the Dings Co. or online at
www.dingsco.com.
For replacement parts, please furnish this data with
your order:
Brake model number
Description (refer to Parts List)
If ordering a hub, specify bore diameter and
keyway dimensions
If ordering electrical parts, specify voltage and
frequency
For a replacement brake, please furnish this data
with your order:
Brake model number
Voltage and frequency
Hub bore and keyway dimensions
Mounting - horizontal or vertical. If vertical,
specify whether above or below motor. If brake
includes foot mounting bracket or adapter, specify.
WARRANTY
Seller warrants products manufactured by it and
supplied hereunder to be free from defects in materials
and workmanship under normal use and proper
maintenance for a period of twelve months from date
of shipment. If within such period any such products
shall be proved to Seller’s reasonable satisfaction to be
defective, such products shall be repaired or replaced
at Seller’s option Seller’s obligation and Buyer’s
exclusive remedy hereunder shall be limited to such
repair and replacement and shall be conditioned upon
Seller’s receiving written notice of any alleged defect
no later than 10 days after its discovery within the
warranty period and, at Seller’s option, the return of
such products to Seller, f.o.b. its factory, when such
return is feasible. Seller reserves the right to satisfy
its warranty obligation in full by reimbursing Buyer
for all payments it makes hereunder, and Buyer shall
thereupon return the products to Seller. Seller shall
have the right to remedy such defects. Seller makes no
warranty with respect to wear or use items, such as
belts, chains, sprockets, discs and coils, all which are
sold strictly AS IS.
The foregoing warranties are exclusive and in lieu
of all other express and implied warranties (except
of title) including but not limited to implied
warranties of merchantability, fitness for a
particular purpose, performance, or otherwise,
and
in no event shall the Seller be liable for claims (based
upon breach of express or implied warranty, negligence,
product liability, or otherwise) for any other damages,
whether direct, immediate, incidental, foreseeable, con-
sequential, or special.
4740 WEST ELECTRIC AVENUE MILWAUKEE, WI 53219 PHONE 414/672-7830 FAX 414/672-5354 www.dingsbrakes.com