Nokta detectors Golden King NGR - Manual (Page 29)

GAUGE DIGITAL
GOLDEN
6 8 3 0
METAL MINERAL
RESET BUTTON
Ground Balance
The reset button will bring all the detection settings of your system to the
settings when you made the ground balance. Reset should not be used when
you are on the target signal. Otherwise, it may cause loss of depth and
misinterpretation of the signal.
The reset operation should be performed when the coil is away from the
target. You are recommended to reset after each operation.
RESET BUTTON
Note:
When ground balance cannot be performed completely due to high levels
of minerals, return to the “SENSITIVITY” menu and reduce the sensitivity
level. Continue this operation until you can do the ground balance
completely.
Note:
Ground balance should be performed on a ground where there is no
metal or cavity. Otherwise, the equipment will detect that you are on a
metal or cavity and will warn you accordingly. In such a case, change your
location and do it again.
Detection Functions
Interface Selection
The Golden King Deep Processor Radar system offers two types of detection
interfaces. First one is “ DIGITAL” and the second one is “GAUGE” interface.
The user can search by selecting the interface which he/she will use most
conveniently. These interfaces can be changed anytime through the interface
selection menu.
You can select the interface you want from the menu above with the
right/left direction keys. You can save the interface you have selected by
pressing the“OK” button.
23
INTERFACE SELECTION