Nokta detectors Golden King NGR - Manual (Page 32)

min max
ALTIN
7 3 2 1
CAVITY MINERAL
6 8 3 0
METAL MINERAL
2 3
YOU DETECTED A TARGET!
PLEASE HOLD “CONFIRM” BUTTON AND PASS
OVER THE TARGET TO GET ALL INFORMATION
ABOUT THE TARGET.
YOU DETECTED A TARGET!
PLEASE HOLD “CONFIRM” BUTTON AND PASS
OVER THE TARGET TO GET ALL INFORMATION
ABOUT THE TARGET.
min max
2 3
7 3 2 1
CAVITY MINERAL
Detection Functions
CAVITY SECTION GAUGE
It is the section of the GAUGE DETECTION interface which gives cavity
data. In this section, you will follow the target signals and read them in
percentage figures. Due to the gauges, you will see and examine the status of
the signal received from the target in real time. You will see the cavity and the
mineral ratios in numbers.
SCOPE SCREEN
During your searches with the Golden King Deep Processor Radar, you will
easily follow the amplitude of the the target signal in real time on the
SCOPE Screen. On this screen, you will determine the highest amplitude
point of the signal center in real time and examine the signal graph of both the
cavity and the metal targets. Unlike the general detection, you can observe the
highest point of the target signal when you use the gauge detection.
The highest point that the pointer reaches represents the center of the target
signal.
REPORT SCREEN
Searching with the gauge screen of the Golden King Deep
Processor Radar is very clear and pleasant. While you see the clear
information received from the target signal on the report screen, you will also
be informed about the following steps to be performed.
26