Nova-Tech LBK Series - Manual (Page 14)

© Adam Equipment Company 2009
11
6.0 FUNCTION SETTING
6.1 ENTERING THE FUNCTION SETTING MODE
• Press [On/Off] to shut off the power.
• Hold [Tare] and press [On/Off] to turn the scale on.
• The display will show “LBK-1.0 LBK” and then enter the auto shut off
mode.
• The display will show “OFF PWR” or “XX PWR” (XX is the number of
minutes before the scale would shut off automatically if it has remained
stable for the set amount of time).
• Release the [Tare] key.
6.2 SETTING OF AUTO SHUT OFF FUNCTION
• Press [Tare] to change the setting of the function.
• “OFF PWR” means that the function is disabled.
• “XX PWR” means that the auto off function is on. XX is the time before
the scale will shut off automatically. The number is in minutes.
• To continue to other function settings, press [Unit] to confirm the
current setting and show the next mode.
• The display will then show “OFF bL”, “On bL”, or “AuTo bL” these are the
backlight function settings.
6.3 BACKLIGHT SETTING MODE
• Press the [Tare] key to change the state of backlight.
• “OFF BL”: the backlight is off all the time.
• “AuTo bL”: auto backlight, backlight will come on if the display moves off
of zero.
• “On bL”: backlight will be on all the time.
• Press [Unit] to confirm and move to the next setting.
• When you enter the unit setting mode, it will show “On PEr” or “OFF PEr”.