Material safety data sheet, First aid, Fire fighting measures – Nova-Tech 4178, 4179, 4561, 4562, 4566, 4567, 4568, 4569, 4573, 4580, 4581 Control Company User Manual

Page 2: Accidental release measures, Handling and storage

Advertising
background image

Material Safety Data Sheet

Page 2 of 4

Product Name(s):

Traceable® Conductivity Standard

Date: March 2011

Product Number(s):

4066, 4067, 4068, 4069, 4161, 4162, 4173, 4174, 4176, 4177, 4178, 4179, 4561, 4562, 4566, 4567, 4568, 4569, 4573, 4580, 4581

4. First Aid

Inhalation:

Remove individual to fresh air. If not breathing, give artificial respiration or oxygen as appropriate. Seek
medical attention at once.

Skin Contact:

Flush skin with water for 15 minutes and remove contaminated clothing. Wash shoes and clothing before reuse.

Eyes:

Immediately flush eyes with plenty of water for at least 15 minutes while holding eyelids apart.

Ingestion:

Immediately drink water to dilute. Induce vomiting. Consult a physician immediately.
Never give anything by mouth to an unconscious person.

5. Fire Fighting Measures

Flammability Summary (OSHA):

Not flammable.

Flammable Properties:
Flash Point:

None

Autoignition Temperature:

ND

Upper Flammable/Explosive Limit, % in air:

NA

Lower Flammable/Explosive Limit, % in air:

NA

Fire/Explosion Hazards:

Not a hazard.

Extinguishing Media:

Does not support combustion. Use equipment appropriate to the main cause of the fire.
Do not allow contaminated water to enter sewers or waterways.

Fire Fighting Instructions:

Use water to cool containers.

Hazardous Combustion Products: Hydrochloric acid vapors may be formed in a fire.

6. Accidental Release Measures

Personal Protection for Emergency Situations:

Contain the release and eliminate its source if this can be done safely.

Spill Mitigation Procedures
Air Release:

Not a hazardous event.

Water Release:

This material is soluble in water. Contain all liquid for treatment and/or disposal as a (potential) hazardous
waste. Notify all downstream users of possible contamination.

Land Release:

Create a dike or trench to contain materials. Absorb spill with inert material (e.g., dry sand, clay, earth or
commercial absorbent), then place in a chemical waste container.
Contain all contaminated water for disposal and/or treatment.

Additional Spill Information:

Stop source of spill as soon as possible and notify appropriate personnel. Utilize emergency response
personal protection equipment prior to the start of any response. Evacuate all non-essential personnel.

7. Handling and Storage

Handling:

Do not take internally. Avoid contact with skin, eyes and clothing. Upon contact with skin or eyes, wash
with water. Avoid breathing vapor, mist or gas.

Storage:

Keep container closed when not in use.

Shelf Life Limitations: See label or certificate of analysis for shelf life if applicable.
Incompatible Materials for Storage:Refer to Section 10, "Incompatible Materials."

Advertising
This manual is related to the following products: