Nova-Tech CON 700 User Manual
Instruction manual, Con 700 conductivity/ºc/ºf bench meter
Advertising
Table of contents
Document Outline
- 1. INTRODUCTION
- 2. GETTING STARTED
- 3. ELECTRODE INFORMATION
- 4. CALIBRATION
- 5. MEASUREMENT
- 6. SETUP FUNCTIONS
- 6.1 P1.0 CAL (Calibration)
- 6.2 P2.0 ELE (Electrode Information)
- 6.3 P3.0 ConF (Configuration)
- 6.4 P3.1 rdY (Ready / Stability Indicator)
- 6.6 P3.3 AtC (Automatic Temperature Compensation)
- 6.7 P3.4 tdS (Total Dissolved Solids factor)
- 6.8 P3.5 t.CO (Temperature Coefficient)
- 6.9 P3.6 t.nr (Normalization Temperature in ºC)
- 6.10 ACAL (Automatic Conductivity Calibration)
- 6.11 SPC (Single Point Calibration)
- 6.12 CELL (Nominal Cell Constant)
- 6.13 P4.0 rSt (Reset)
- 6.14 P5.0 CLr (Clear Memory)
- 7. CALCULATING TDS CONVERSION FACTOR
- 8. CALCULATING TEMPERATURE COEFFICIENTS
- 9. REPLACEMENTS AND ACCESSORIES
- 10. TROUBLESHOOTING GUIDE
- 11. SPECIFICATIONS
- 12. WARRANTY
- 13. RETURN OF ITEMS
- [email protected]