Nova-Tech CRT V570 - Manual

V570
V
5
7
0
Water and Chemical Resistant
Industrial Strength HVAC Surface Protector
HVAC surfaces can
take a beating. Extending HVAC system
life is easy to do.
Water, chemicals, contaminants, industrial
gases, cleaners - all take their toll on the
metals of an HVAC system. Flat surfaces,
such as the condensate pan or drain basin,
as well as vertical, slanted and curved
HVAC surfaces will all eventually rust and
corrode in the harsh HVAC environment.
The corrosion of heating and air
conditioning units and evaporative coolers
costs businesses millions of dollars every
year in replacement and lost functionality.
Corrosion can become so severe that
leakage occurs right through the floor into
sensitive office or kitchen or retail or
storage spaces below on a lower level.
To protect your HVAC system from
premature wear, you need a coating that
will not peel in this harsh environment.
V570 is the best solution available on the
market today to protect all the surfaces in
an HVAC system.
You can extend the life and usability of
your HVAC assets by coating
Prevent rust and corrosion
from occurring in the first place by coating
early before any signs of deterioration.
Prevent further deterioration by coating as
soon as any corrosion is detected.
Small pinholes are a serious indication of
corrosion and deterioration of the structural
integrity of the HVAC system. V570 can
seal small pinholes up to 25 mils in
diameter, eliminating condensate leakage
and reducing further deterioration.
vertical or
curved metal surfaces, and under Pancrete
that is applied on horizontal surfaces that
are under water. V570 is resistant to harsh
industrial coil cleaning materials and is
water resistant.
On HVAC condensate pans and
evaporative cooler basins where there is
standing water, using a combination of a
1/4 inch coating of Pancrete Condensate
Pan Resurfacer on top of the V570 will
provide the ultimate protection.
Save thousands in HVAC
replacement costs using
Rusted vertical walls in air
handling unit coated with V570
Controlled Release Technologies, Inc.
1016 Industry Drive • Shelby, NC 28152
800.766.9057 • fax 704.487.0877 • [email protected]