Pach and Company AeGIS NPB9000P Series Software manual - Manual (Page 20)

Figure 5.2
Figure 5.3
Welcome Message Enter the welcome message up to 48 characters.
[Message] Click this button to send the welcome message to the AeGIS 9000
Series.
[DataBase] Click this button to send:
• Tenant Database
• Access Code Database
• Auto Schedule Database
• Holiday Database
• Time Zone Database
to the AeGIS 9000 Series.
[Single] Click this button to set the AeGIS to single. By default the AeGIS
9000 Series is set for Single system.
[Multi] Click this button to set the AeGIS 9000 Series to Multi. Each
system must be set to multi if more than one systems are on the
same phone line.
[Pulse] Click this button to set the system to pulse. The system will dial in
pulse mode. Do not set the system to pulse if the local provider
does not support pulse dialing.
[Tone] Click this button to set the system to tone. Default setting is tone.
[NPBX] Click this button to disable PBX dialing.
[PBX] Click this button to enable PBX dialing. [PBX No] button will be
enabled. This feature is used to request an outside line before
dialing the telephone number.
[w/Cd] Click this button and you must use the card then the keypad code
to gain access.
[w/oCd] Click this button and you can use card or keypad code to gain
access.
[ClrAts] Click this button to clear all auto schedule database at the
system. Note: The button does not delete the Auto Schedule
Database File on your computer.
[ClrTmz] Click this button to clear all time zone database at the system.
Note: The button does not delete the Time Zone Database File
on your computer.
[ClrHld] Click this button to clear all holiday database at the system.
Note: The button does not delete the Holiday Database File
on your computer.
[ClrEvr] Click this button to clear all event log in the buffer.
[Clear Access Code] Enter the 4-digit code to be deleted in the text box or
enter 0000 to clear all access codes in the system, click
the [clear Access Code] or press <Enter>.
Note: The button does not delete an individual
access code or access code database file in your
computer. You must delete them separately.
SEND BUTTONS FUNCTION
Pach and Company Chapter 5 Page 15
AeGIS 9000 Series Management Software BUTTONS AND MENU 03/01/02