Pach and Company AeGIS 8000P Series Software manual - Manual (Page 14)

Chapter 4
SETTING THE MODEM
Internal or external Hayes Compatible modem can be used with the software. Some modems may be incompatible with the
software. Recommended modem brand is ZOOM, SUPRAMAX or 1200 Hayes Compatible. Pach and and Company will
not responsible for any incompatibility problem, including the ones that we recommended.
Follow the steps below to set your modem.
Step 1 Install the modem if you haven’t installed it. Locate the COMM PORT where the modem is installed. Go to Control
Panel to locate your modem port.
Step 2 Open the AeGIS 8000P Series Management Software Program as shown on figure 4.1.
Figure 4.1 Main Screen
Step 3 Select the modem port number (1-4) under Select Port see figure 3.1.
Step 4 Click {Setting} menu to set the COMM Setting String and Byte Cycle. You will see figure 3.2
Figure 4.2 Modem COMM Setting
Pach and Company Chapter 4 page 10
AeGIS 8000P Series Management Software SETTING THE MODEM