2 updating received tenant database – Pach and Company AeGIS 8000 Series Software manual User Manual
Page 29
Advertising
8.2 UPDATING RECEIVED TENANT DATABASE.
Updating the received tenant database is the same as Chapter 6, if the tenant directory is set to 3-digit. If the tenant
directory is set to 2-digit or 3-digit you must follow the procedure below.
Step 1
Click {File} Menu as shown on figure 8.2.1
Figure 8.2.1
Step 2
Select {Open Tenant File} as shown on Figure 8.2.2.
Figure 8.2.2
You must follow this section to update the received tenant database if the tenant
directory is set to 2-digit or 4-digit. Refer to Chapter 6 if tenant directory is set to
3-digit.
Pach and Company
Chapter 8
page 25
AeGIS 8000 Series Management Software
RECEIVING THE DATABASE
Advertising