APW Wyott 1848 - Manual (Page 7)

ELECTRICAL CONNECTIONS
WARNING:
WARNING:
Terminal Box Location.
Loading.
Fusing.
Electrical and grounding connections must comply with the applicable portions of the national
electrical code and/or other local electrical codes.
Disconnect electrical power supply and place a tag at the disconnect switch indicating that you
are working on the circuit.
As indicated in Fig. 1, the terminal boxes can be located at either the left front or
the right rear of the griddle. When shipped from the factory, the device has the terminal box attached in the
left front position. The box can be relocated to the alternate position by removing two screws. .
Electrical loadings of the griddles covered by this instruction are tabulated on the appropriate
wiring diagram.
Griddle is not fused and must be connected to a properly fused circuit.
EGD-1824, 208/240/480VAC, 1 & 3 Phase (Wiring Diagram)
7